Cremio® Milk Frother

 

 

You can use all kinds of commercially available milk (regardless of fat content). Even soy lactose-free milk can be perfectly frothed with Melitta® Cremio®. The protein content plays a key role for excellent milk froth results. The higher this is, the more stable and finer the results.

 

That depends on the milk quantity filled in. In general, the preparation takes approx. 2 to 3 minutes.

 

You can tell that preparation is complete when the motor is no longer running and the switch light goes out.

 

We recommend using a wooden or plastic spoon to remove the milk froth to avoid damage to the non-stick coating. Use a soft sponge with washing-up liquid for cleaning.

 

The lid and the whisk are dishwasher-safe. A soft, moist cloth with a little washing up liquid is sufficient for cleaning the non-stick milk container.

 

To clean the base station, please disconnect the mains plug from the power socket and wipe the base station with a soft, damp cloth and conventional dishwashing detergent.

 

The appliance works with 450 watts. How high is the output in OFF mode? The output in OFF mode is less than 1 watt.

 

The output in OFF mode is less than 1 watt.

 

The left-hand indicator light in the button flashes blue if the appliance is still too warm from the previous operation. Allow the appliance to cool down for a few minutes.

 

The container could not be filled up to the minimum filling level and the whisk consequently is not in contact or only has slight contact with the milk. Rinse the appliance and allow it to cool down, then you can start preparation again.

 

The appliance may have been overfilled. Disconnect the plug from the mains socket and allow the appliance to cool down. Next, clean the appliance and you can start preparation again after that. If necessary, use a different type of milk that does not froth so much or fill less milk into the milk container if the milk froths excessively.