Automatic coffeemaker - Barista T Smart®
General information
You can find answers to questions about our Connect app in our FAQ section "Automatic Coffeemakers". Simply click "back" above for this.
With the Barista TS Smart®, the coffee powder quantity for the respective brewing strengths is 7 to 13 g. You can set the brewing strength in five stages.
First, remove the milk hose from the appliance and then push the outlet fully downwards. Press the locking mechanism of the milk unit together using two fingers on one hand and pull it downwards off the outlet. Lift the milk distributor out of the milk unit and pull the inlet upwards. Rinse the individual parts with warm water and use the enclosed cleaning brush, a soft, damp cloth and normal washing-up liquid for cleaning. The milk unit is reinserted in reverse order.
In order to successfully apply expert settings and appliance settings, they must be actively saved after being changed (by pressing Apply/Save). Scrolling may be required to do this.
The drive may possibly not be in the correct position. Check whether the water tank is filled and the drip tray is inserted. Switch the appliance OFF and ON again and then press the My Coffee buttons and the On /Off button simultaneously for longer than 2 seconds. The drive moves into position. Then reinsert the brewing unit and check that it is correctly locked.
You can dispense warm milk by holding the milk froth button for longer.
a) The ascending milk container tube may possibly not be connected properly to the lid.
b) The milk hose may possibly not be connected properly to the outlet and/or the milk container.
The drip tray should only ever be emptied when the appliance is switched on. If you empty it while the appliance is switched off, this will not be recognised by the appliance sensor and can lead to error messages. Pull out the drawer while the appliance is switched on and then reinsert it.
The left compartment is intended for espresso beans (dark roasted beans), the right compartment for café crème beans (light roasted beans). However, the assignment of the bean compartments to the recipes can also be changed manually or the automatic Bean Select completely deactivated.
Can I also connect the milk container on the left-hand side? Yes. Upon delivery, the milk container is connected on the right-hand side. To connect the milk container on the left-hand side, pull the milk hose out of the outlet and push it all the way down. Unlock the milk unit and pull it downwards off the outlet. Pull the milk distributor upwards out of the unit, turn it 180° and put it back in the milk unit. Installation is carried out as described in reverse order.
Easy Cleaning allows you to clean all milk system parts quickly and hygienically with hot water and steam after beverages are dispensed. This should be performed after each time milk is dispensed or can also be started separately via the menu.
The mill is ground empty during each cup dispensing so that fresh coffee is used cup for cup. After switching over the coffee bean type, the new bean type is immediately mainly used. The display for the bean container indicates that the container is full, even though it is empty. The light barrier may be dirty or a coffee bean may be stuck in front of the sensor. Please clean the bean container.
As there is only one water outlet, only one cup of americano or long black can be dispensed at a time.
A total of 18 different coffee specialties can be prepared. Here is an overview of the recipes: Espresso, Ristretto, Lungo, Espresso Doppio, Ristretto Doppio, Café Crème, Café Crème Doppio, Americano, Americano Extra Shot, Cappuccino, Espresso Macchiato, Café Latte, Café au Lait, Flat White, Latte Macchiato, Latte Macchiato Extra Shot, Latte Macchiato Triple Shot, Warm Milk, Milk Froth.
Upon delivery, the recipes are stored in the "My Coffee" profiles 1 to 8. You can find an overview of the assignment of the recipes to the profiles on the insert in your Welcome Package or here. To call up a recipe, press the "My Coffee" button several times to select the corresponding "My Coffee" profile and then press the direct key for the desired beverage.
The recipes can also be changed individually in the menu and saved to the direct keys or "My Coffee" profiles (see "Permanently changing beverage settings" in the operating instructions).
The coffee bean compartment for the recipe is empty. Please refill the coffee beans.
Alternatively you also can switch the coffee bean type used once via the control panel. However, the assignment of the bean compartments to the recipes can also be changed manually or the automatic Bean Select completely deactivated (see chapter "Changing basic settings" in the operating instructions).
Press the "menu / ok" button for at least 2 seconds so that the display switches to the menu. Select the "Care" menu option there. You can now choose from the various programs for descaling or cleaning.
The brewing unit can be wiped with a damp cloth or brushed out with the brush from the cleaning kit. It can also be cleaned under running water.
The grinding fineness has been optimally set prior to delivery. We recommend not adjusting the grinding fineness until at least 100 cups of coffee have been dispensed.
To adjust the grinding fineness, open the cover on the right-hand side and prepare any coffee drink. Move the grinding fineness adjustment lever to the front with the grinder running in order to set a finer grinding fineness or to the rear to set a coarser grinding fineness. Please note that the grinding fineness may only be adjusted when the grinder is running, as the grinder may otherwise be damaged. Then, close the cover again.
Please switch off the appliance. Clean the outside of the appliance with a soft, damp cloth and normal washing-up liquid. Do not use any abrasive cloths, sponges or cleaning agents. The drip tray and the coffee grounds container can also be cleaned with a soft, damp cloth and washing-up liquid. We recommend using a soft, dry cloth for cleaning the bean container.
Trouble Shooting
The drip tray should only ever be emptied when the appliance is switched on. If you empty it while the appliance is switched off, this will not be recognised by the appliance sensor and can lead to error messages. Pull out the drawer while the appliance is switched on and then reinsert it.
Take a look at the "Rectifying problems" chapter in the operating instructions. If you cannot get your machine to operate again with the notes provided there, contact our Service Centre by calling 0571 86 1900 (local rate). The hotline can be reached from Monday to Friday between the hours of 8:00 am and 6:00 pm.
In order to successfully apply expert settings and appliance settings, they must be actively saved after being changed (by pressing Apply/Save). Scrolling may be required to do this.
Switch the appliance off and back on again. If the display continues to appear, please contact the hotline
The coffee bean compartment for the recipe is empty. Please refill the coffee beans.
Alternatively you also can switch the coffee bean type used once via the control panel. However, the assignment of the bean compartments to the recipes can also be changed manually or the automatic Bean Select completely deactivated (see chapter "Changing basic settings" in the operating instructions).
Accessories
A total of 18 different coffee variants can be prepared. Here is a list of the recipes: espresso, ristretto, lungo, espresso doppio, ristretto doppio, café crème, café crème doppio, americano, americano extra shot, cappuccino, espresso macchiato, cafè latte, café au lait, flat white, latte macchiato, latte macchiato extra shot, latte macchiato triple shot, warm milk and milk froth.
Our accessories can be purchased from all specialist electrical retailers that sell our automatic coffeemakers.
Cleaning and care
Easy Cleaning allows you to clean all milk system parts quickly and hygienically with hot water and steam after beverages are dispensed. This should be performed after each time milk is dispensed or can also be started separately via the menu.
Press the "menu / ok" button for at least 2 seconds so that the display switches to the menu. Select the "Care" menu option there. You can now choose from the various programs for descaling or cleaning.
The brewing unit can be wiped with a damp cloth or brushed out with the brush from the cleaning kit. It can also be cleaned under running water.
Please switch off the appliance. Clean the outside of the appliance with a soft, damp cloth and normal washing-up liquid. Do not use any abrasive cloths, sponges or cleaning agents.
The drip tray and the coffee grounds container can also be cleaned with a soft, damp cloth and washing-up liquid. We recommend using a soft, dry cloth for cleaning the bean container.
Descaling display
You can find an overview of all operating instructions for Melitta appliances here.